View the most recent changes for the avr-binutils port at: avr-binutils.darwinports.com/diff
Scroll down toward the bottom of the page to get installation instructions for avr-binutils.
The raw portfile for avr-binutils 2.16.1 is located here:
http://avr-binutils.darwinports.com/dports/cross/avr-binutils/Portfile
Find related portfiles with the unique DarwinPorts.com search feature.
Check for any related Fink projects here: pdb.finkproject.org/pdb/package.php/avr-binutils

Web Darwinports.com




# $Id: Portfile 30687 2007-11-04 07:27:28Z pguyot kallisys.net $

PortSystem 1.0
Name: avr-binutils
Version: 2.16.1

# Parameters for this port.
set crossgcc-target avr

Description: FSF Binutils for avr cross development
Long Description: Free Software Foundation development toolchain ("binutils") for avr cross development.
Platform: darwin
Category: cross devel
Maintainers: pguyot kallisys.net metamagix gmail.com
Homepage: http://www.gnu.org/software/binutils/binutils.html
master_sites gnu:binutils
distname binutils-${version}
use_bzip2 yes
checksums md5 6a9d529efb285071dad10e1f3d2b2967 sha1 5c80fd5657da47efc16a63fdd93ef7395319fbbf rmd160 638861a6b709ac380f1bc13d55c6b48d0532b3d0

# All cross ports violate the mtree layout.
destroot.violate_mtree yes

# Download everything to binutils/
dist_subdir binutils

# Patches
patchfiles patch-bfd-Makefile.am.diff patch-bfd-Makefile.in.diff patch-bfd-coff-avr.c.diff patch-bfd-coff-ext-avr.c.diff patch-bfd-coffcode.h.diff patch-bfd-coffgen.c.diff patch-bfd-coffswap.h.diff patch-bfd-config.bfd.diff patch-bfd-configure.diff patch-bfd-configure.in.diff patch-bfd-targets.c.diff patch-binutils-Makefile.am.diff patch-binutils-Makefile.in.diff patch-binutils-bucomm.c.diff patch-binutils-bucomm.h.diff patch-binutils-budbg.h.diff patch-binutils-debug.c.diff patch-binutils-debug.h.diff patch-binutils-doc-objcopy.1.diff patch-binutils-objcopy.c.diff patch-binutils-rdcoff.c.diff patch-binutils-wrcoff.c.diff patch-gas-config-tc-avr.c.diff patch-include-coff-avr.h.diff patch-include-coff-internal.h.diff patch-include-opcode-avr.h.diff patch-libiberty-Makefile.diff patch-opcodes-Makefile.diff

# Build in a different directory, as advised in the README file.
pre-configure { system "cd ${workpath} && mkdir -p build"}
configure.dir ${workpath}/build
configure.cmd ${worksrcpath}/configure
configure.cc "cc -no-cpp-precomp"
configure.args --infodir='${prefix}/share/info' --target=${crossgcc-target} --program-prefix=${crossgcc-target}- --mandir='${prefix}/share/man'
build.dir ${workpath}/build

# We don't want the etc module.
post-extract {
system "rm -rf ${worksrcpath}/etc"
}

post-patch {
namespace eval crossgcc {}

# Fix the info pages and related stuff.
#
# path: path to the doc directory (e.g. gas/doc/)
# makefile: path to Makefile.in (e.g. gas/doc/Makefile.in)
# name: name of the info page (e.g. as)
# suffix: suffix of the souce page (texinfo or texi)
proc crossgcc::fixinfo { path makefile name suffix } {
global crossgcc-target worksrcpath

# Fix the source
reinplace "s|setfilename ${name}.info|setfilename ${crossgcc-target}-${name}.info|g" ${worksrcpath}/${path}/${name}.${suffix}
reinplace "s|(${name})|(${crossgcc-target}-${name})|g" ${worksrcpath}/${path}/${name}.${suffix}
reinplace "s| file{${name}}| file{${crossgcc-target}-${name}}|g" ${worksrcpath}/${path}/${name}.${suffix}

# Fix the Makefile
reinplace "s|${name}.info|${crossgcc-target}-${name}.info|g" ${worksrcpath}/${makefile}
reinplace "s|${name}.${suffix}|${crossgcc-target}-${name}.${suffix}|g" ${worksrcpath}/${makefile}

# Rename the source
file rename ${worksrcpath}/${path}/${name}.${suffix} ${worksrcpath}/${path}/${crossgcc-target}-${name}.${suffix}

# Fix install-info's dir.
# (note: this may be effectless if there was no info dir to be fixed)
reinplace "s|--info-dir=\$(DESTDIR)\$(infodir)|--dir-file=\$(DESTDIR)\$(infodir)/${crossgcc-target}-dir|g" "${worksrcpath}/${makefile}"
}

# Fix the gettext files and related stuff.
#
# module: name of the module (e.g. gas)
proc crossgcc::fixgettext { module } {
global crossgcc-target worksrcpath

if { [ file exists "${worksrcpath}/${module}/Makefile.in" ] } {
reinplace "s| PACKAGE |${crossgcc-target}- PACKAGE |g" "${worksrcpath}/${module}/Makefile.in"
}
if { [ file exists "${worksrcpath}/${module}/doc/Makefile.in" ] } {
reinplace "s| PACKAGE |${crossgcc-target}- PACKAGE |g" "${worksrcpath}/${module}/doc/Makefile.in"
}
if { [ file exists "${worksrcpath}/${module}/po/Make-in" ] } {
reinplace "s| PACKAGE |${crossgcc-target}- PACKAGE |g" "${worksrcpath}/${module}/po/Make-in"
}
}

# gas/doc/as.texinfo
crossgcc::fixinfo gas/doc/ gas/doc/Makefile.in as texinfo

# bfd/doc/bfd.texinfo
crossgcc::fixinfo bfd/doc/ bfd/doc/Makefile.in bfd texinfo

# binutils/doc/binutils.texi
crossgcc::fixinfo binutils/doc/ binutils/doc/Makefile.in binutils texi

# gprof/gprof.texi
crossgcc::fixinfo gprof/ gprof/Makefile.in gprof texi

# ld/ld.texinfo
crossgcc::fixinfo ld/ ld/Makefile.in ld texinfo

# gettext stuff.
crossgcc::fixgettext bfd
crossgcc::fixgettext binutils
crossgcc::fixgettext gas
crossgcc::fixgettext gprof
crossgcc::fixgettext ld
crossgcc::fixgettext opcodes
}

post-destroot {
# Installing (host) libiberty was a mistake.
file delete "${destroot}/${prefix}/lib/libiberty.a"
}

# livecheck.
# This release is equivalent to FreeBSD 2.16.1_5
# It doesn't make much sense to compare to binutils release.
livecheck.regex ">$name-(.*?)<"
livecheck.url "http://www.freebsd.org/cgi/ports.cgi?query=${name}&stype=all"
livecheck.version 2.16.1_5

If you haven't already installed Darwin Ports, you can find easy instructions for doing so at the main Darwin Ports page.
Once Darwin Ports has been installed, in a terminal window and while online, type the following and hit return:

%  cd /opt/local/bin/portslocation/dports/avr-binutils
%  sudo port install avr-binutils  
Password: 

You will then be prompted for your root password, which you should enter. You may have to wait for a few minutes while the software is retrieved from the network and installed for you. Y ou should see something that looks similar to:

--->  Fetching avr-binutils
--->  Verifying checksum for avr-binutils
--->  Extracting avr-binutils
--->  Configuring avr-binutils
--->  Building avr-binutils with target all

--->  Staging avr-binutils into destroot

--->  Installing avr-binutils

- Make sure that you do not close the terminal window while Darwin Ports is working. Once the software has been installed, you can find further information about using avr-binutils with these commands:

%  man avr-binutils
%  apropos avr-binutils
%  which avr-binutils
%  locate avr-binutils

 Where to find more information: